Skip to main content

142026

Data / Facts

L2 / Working length: 265-300mm

Teeth/inch: 12-15

More Information

Catalogue

saws

NEO fine cut saw

  • Replaceable saw blade
  • Traditionally long bast wrapped handle
  • 15 teeth/inch suitable for general fine cuts, plywood, furniture making, treated wood, etc.
  • 12 teeth/inch suitable for general carpentry, plywood, treated material, PVC and ABS, hard wood, etc.
  • Each 265 mm blades and 300 mm blades fit in the same handle

 

Precision - the pull cut

 

 

Precision - the pull cut

Makes possible a thin saw blade / Easy and safe start / No bending, no unevenness / Precise and controlled cut

 

06-SAE-PI-04-Handling-Die-Zahnung.png

 

 

06-SAE-PI-04-Handling-Die-Zahnung.png

The triple edge teeth make possible cross and rip cutting / Electronic pulse hardening provides up to 3 times longer tool life / The teeth are ground individually using diamond

 

Little force required

 

 

Little force required

Hold the handle lightly / The pulling cut does not require great force or strength / Guide the saw and let it make the cut itself using its own weight / It is important that the cutting angle is less than 10º.

 

Cutting angle less than 10°

 

 

Cutting angle less than 10°

It is important that the cutting angle is less than 10°.

 

Easy sawing, easy going

 

 

Easy sawing, easy going

Shark saw, the precision pull saw. With only 20 % of your physical power you cut 5 times more than with classical saws.The shark saw has three cutting edges which allows cross and rip cutting.The electronic pulse hardening provides up to 3 times longer tool life and the teeth are individually ground by diamonds. In spite of the thin blade it is easy and safe to start sawing without bending or unevenness.

Features

  • Clamp the work piece or provide a firm support with stop in the direction of pull.
  • Check the work piece for ob structions (screws, nails, etc.). These may damage the saw.
  • Maintain a cutting angle of less than 10º.
  • The weight of the saw executes the cut on its own.
  • Slightly increase the pressure on the saw once a small groove has been cut.
  • Always pull the saw briskly and without great application of force.
  • Use the full length of the saw blade by pulling the saw uniformly through.
  • Always fit the protector over the teeth when finished. This ensures a long life of the shark saw.
  • Store the saw safely away from children.

For use in / Application

Hardwood

Wood

PVC / Arcrylic

Drive / Execution / Features